Finesse now manufacture a range of Variable Frequency Drives, VFDs, for use in many industrial applications involving motors. Our IP65 rated VFDs come fully enclosed with a simple 'plug and play' setup. VFDs can be tailored to your requirements with the addition of some optional features.
For centrifugal pumps, HVAC systems and fans, substantial energy savings can be achieved, the power used against motor speed can be seen. Using a Finesse VFD, running a motor at 90% speed achieves a 27% decrease in energy consumed. |
In other motor applications like mixing and conveying, motors are often overrated and choked to reduce their speed. Replacing the system with a Finesse VFD allows energy savings to be achieved from the time of installation.
As motors generally run for long periods of time over many years, the largest costs associated with motors are the energy costs to run them – using a VFD can dramatically reduce energy consumption.
As motors generally run for long periods of time over many years, the largest costs associated with motors are the energy costs to run them – using a VFD can dramatically reduce energy consumption.
“Using energy efficiently helps organisations save money as well as helping to conserve resources and tackle climate change”
- ISO
Finesse VFDs are fully enclosed and can be easily retrofitted to existing motors with minimal effort – just attach the VFD to the mains supply and the motor and it’s ready to go. Both single and three phase VFDs are available in a full range of motor sizes – from 0.12kW to 30kW. Larger drives and bespoke solutions can also be provided.
FEATURES: • Simple to install and use • Fully enclosed IP65 rated enclosures • High Quality Siemens V20 drive used • No Programming or technical set up required • Reduced CO2 Emissions • Reduced mechanical wear – due to the soft start and ramp up features • Easy to use OPTIONAL EXTRAS: • An external speed adjustment dial • A safety isolator • An external FWD/STOP/REV switch |
Running a Finesse VFD with a 2.2kW motor at 80% speed, 12hrs a day, 300 days per year equates to
a saving of £464 per year
assuming 12p per kWh
The following presents the range of VFDs we manufacture in kW. Larger, bespoke drives can be produced should these be required. For current costs and estimated lead times, please get in touch using our contact us form.
Single Phase |
Three Phase |
0.12 |
0.37 |
0.25 |
0.55 |
0.37 |
0.75 |
0.55 |
1.1 |
0.75 |
1.5 |
1.1 |
2.2 |
1.5 |
3 |
2.2 |
4 |
3 |
5.5 |
. |
7.5 |
Contact Us
|